Truck Crane
A truck crane is a special kind of engineering machinery that installs the crane's lifting device on the chassis of a truck. This design enables the truck crane to have both the driving function of a truck and the lifting capacity of a crane. It can use its power system to move quickly between different work sites and quickly start lifting operations after arriving at the destination. It is an efficient engineering equipment that integrates transportation and lifting functions.
Truck cranes have many significant features. First, it has excellent maneuverability. Because it is based on the truck chassis design, it can easily travel on various road conditions, whether it is urban roads or rugged rural roads, it can quickly reach the work site, greatly shortening the transition time. Secondly, its lifting performance is excellent, and the boom usually adopts a telescopic or folding structure. The length and angle of the boom can be flexibly adjusted according to actual operation needs, and accurate lifting of objects at different heights and distances can be achieved.
Truck cranes are widely used in many fields. In construction, bridge construction, power engineering, and the installation site of some large equipment, truck cranes have played an important role, in accurately lifting the equipment to the designated location, and creating conditions for the production and operation of the enterprise.
| TRUCK CRANE SPECIFICATION |
| Product Name |
Mobile Truck Crane |
| Brand |
JQCM |
| Chassis Model |
Jiefang (Optional) |
| Vehicle Dimensions |
12000*2500*3950mm |
| Cargo Compartment Interior Dimensions |
8350*2450*600mm |
| Wheelbase |
5865+1350mm |
| Gross Mass |
25000KG |
| Curb Weight |
16580KG |
| Rated Load Capacity |
8290KG |
| Gearbox Model |
Fast 8-Speed High And Low Speed |
| Vehicle Frame |
300 Three-Layer Large Frame |
| Gearbox Model |
Shaanxi Gear 9-Speed High And Low Speed |
| Axle Load |
Front Axle 5T Rear Axle 10T |
| Engine Model |
Xichai (Optional) |
| Engine Power |
290HP |
| Maximum Lifting Height |
21.8m |
| Maximum Lifting Torque |
35T*M |
| Basic Arm Length |
5.6-18.8M |
| Maximum Lifting Weight |
14000KG |
| Rotation Speed |
2.5 |
| Maximum Speed |
90km/h |
| Dual Pump Confluence |
Aluminum Alloy Hydraulic Oil Tank |
| Hydraulic Outriggers |
Automatic (Double-Chamber Rear Outrigger) |
| Boom Extension And Retraction |
Return Rope |
| Boom Extension Method |
Dual Cylinder Boom |
| Maximum Elevation Angle |
0-75 Degrees |
| Boom |
5 Meters 5 Sections (U-Shaped Boom) |
| Tire Model |
1000R20-18PR |
| Slewing Angle |
360 Degree Full Rotation |
| Refrigeration System |
Air Conditioning |
| Chassis |
Optional |
| Accessories |
Can Be Installed |
| This parameter is for reference only. The actual vehicle configuration shall be subject to the actual vehicle in the store. |
HIGH MOBILITY
The truck crane is designed based on the chassis of a truck and has excellent driving performance. It can travel at a high speed on the road and quickly transfer from one work point to another, greatly reducing the time and cost required for transfer.
WIDE RANGE OF OPERATION
The boom usually adopts a telescopic or folding structure, which can flexibly adjust the length and angle. The telescopic boom can extend the arm length from a shorter state to a longer state according to the operation requirements, greatly increasing the operating radius of the crane. The folding boom can be unfolded in a limited space to meet the operation requirements of narrow sites.
EASY TO OPERATE
The truck crane is equipped with an advanced hydraulic system and electrical control system. The operator can accurately control the lifting, rotation, and amplitude change of the crane through simple control handles and buttons in the cab.
GOOD PASSABILITY
The chassis of the truck crane has a high ground clearance, generally around 30-50 cm, which allows it to easily cross some common obstacles, such as small stones on the road, speed bumps, etc.
STRONG LIFTING CAPACITY
The lifting capacity of truck cranes ranges from a few tons to hundreds of tons, which can meet the lifting needs of projects of different sizes. Its key components such as the boom and winch mechanism are carefully designed and manufactured to withstand large loads.
Q1: Are you a manufacturer or a trading company?
A1: We are a manufacturer with years of experience in research and development, design, and manufacturing in China. We have our R&D team, factory, and marketing department.
Q2: How long is the delivery time for bulk orders?
A2: It depends on the order quantity. Generally, the delivery time is 15 to 40 working days. Please contact us before placing an order.
Q3: Do you provide OEM/ODM services?
A3: Yes, we accept OEM/ODM.
Q4: What about quality control?
A4: Self-inspection in every process by the production operator.Spot inspection and final inspection executed by qc, defective rate be controlled within 1% even lower.
Q5: How will you deliver my order?
A5: Generally, different shipping methods are adopted according to the quantity, volume, and weight of the order. For orders weighing 1 to 200 kilograms, we recommend air freight. For bulk orders, we will ship by sea. It depends on the specific situation. We will compare and find the best solution.
Q6: What is your moq?
A6: Do not have moq limited, trial order before mass production is welcomed.
Audited Supplier 
){kind=link}